PAREX Stucco Only Fiberglass Reinforcing Mesh 38" X 150' Roll
PAREX Stucco Mesh 343.8 is a woven fiberglass standard mesh for reinforcement of stucco walls and assemblies. The Mesh is embedded in a stucco base coat for increased crack resistance and strength. The Mesh can be used on both exterior and interior applications.
Woven fiberglass standard mesh for reinforcement of stucco assemblies
4.5 oz. fiberglass 38 in. (96.5 cm) mesh.
Highly flexible for full walls or details.
Weight: 4.5 oz./yd2 (153/g/m2)
Width: 38 in. (96.5 cm) x 150 in. (381 cm)
Packaging: 4 rolls/box n Color: Green
475 ft2 (43.6 m2)/roll
Avoid storing rolls on end or in direct sunlight.
Embed the Stucco Mesh in Parex USA Stucco Level Coat and/or as close to the surface as possible.
The color of the reinforcing mesh should not be visible at the surface of the level coat. A slight pattern of the mesh is acceptable, due to shrinkage of the cementitious Base Coat upon drying.
Stucco Mesh must be continuous at all corners and must be lapped a minimum of 2-1/2 in (63.5 mm) at the mesh seams.
Not for use on Exterior Insulation and Finish Systems (EIFS).